NA1035

Compressed Sheet with Aramid Fibers, SBR Binder

Applications

NA1035 is a very good general service SBR binder based gasket material that has numerous applications in the process industries handling media like; mild acids and alkalis, water, brine, saturated steam, air, industrial gases, general chemicals, neutral solutions.

Construction

NA1035 is a compressed fiber sheet gasket material produced from a combination of Aramid Fibers, Inorganic Fillers and bonded with Styrene-Butadiene Rubber (SBR). It is manufactured under rigorous quality control standards that are registered under ISO-9001 certification.

Service Limits

Temperature ºF (ºC) Continuous Service: 518 (270)
Maximum Service: 716 (380)
Pressure psi (bar) Continuous Service: 725 (50)
Maximum Service: 1015 (70)
Availability 59 x 63 in
59 x 126 in
Thickness 1/64", 1/32", 1/16", 1/8"
Color Off White - NA1035W
Grey / Black - NA1035B
ASTM F104 F712940E44M9
Typical Physical Properties:
Density - ASTM F1315 112 lb/ft3 (1.80 g/cm3)
Compressibility - ASTM F36A - % maximum 7-17%
Recovery - ASTM F36A - % maximum 50%
Ignition Loss - ASTM F495 - % maximum 27%
Thickness Increase - ASTM F146 - % maximum
ASTM Oil IRM 903 5h @ 300ºF (150ºC) 40%
Fuel B, 5h @ 77ºF (25ºC) 20%
Weight Increase - ASTM F146 - % maximum
ASTM Oil IRM903 5h @ 300ºF (150ºC) 30%
Fuel B, 5h @ 77ºF (25ºC) 30%
Torque Retention 32 MPa

 

 

 

 

 

 

TEADIT NORTH AMERICA - Houston, USA
10545 Red Bluff Road, Pasadena, TX 77507
Phone: (281) 476-3900 - Fax: 281-476-3999 – TOLL FREE: 800-999-0198

2015© Teadit | All Material Copyright are reserved.

 

This website uses modern technologies such as JavaScript, CSS, HTML5 and WebFonts; because of this, it is best viewed in modern browsers.

We recommend to use Google Chrome as your primary browser for this website.